image

SUMI-E DRAWING LESSON

close

Sumi-e Video Tutorial; Preparation, Grinding sumi, Line Drawing...

What you need : Brush(fude), suzuri(ink stone), sumi bar and rice paper(wa shi) , small white plate, clothes



Video 1 tutorial shows 1)Preparation for drawing (making sumi ink and load sumi in the brush(fude), 2) Straight Stroke(Choku-Hitsu), 3) Side Stroke(Soku-Hitsu), 4) Thin Line Drawing(Sen-Byo), 5) Small Leaves Drawing

1) Preparation for Drawing

1. Make sumi ink

Put water in the hole part of suzuri.
Have a sumi bar and dip it into the water.
Grind sumi bar on the no water part of suzuri.
Hold sumi bar with 45 degree toward the surface of suzuri.
Grind sumi bar with very little power and grind it like drawing circle.
Imagine that tiny particle coming out of the ink bar.
The sense of sumi ink rises meanwhile.
Done when the water turns out the black ink.

2. Put sumi into Fude

Put fude into the water.
Put fude onto the clothe in order to wipe water out.
Don't move fude, just put it on softly.
Shape the tip of the hair of fude(fude-saki) sharpened.
Put sumi ink into fude in the suzuri.
Squeeze sumi ink out of fude in the small white plate.
Draw fude on the edge of the small plate, to squeeze sumi out.

3. Calibrate the sumi ink black color

Put the water in fude.
Squeeze water out onto the sumi in the plate and mix it.
Squeeze out the whole mixed sumi-water, which turns out the light black.
Then, ladle that light black sumi into fude.
Dip the fude-saki into the sumi ink in suzuri.
Shape fude on the clothe.
You all set for drawing.

2) Straight Stroke for line drawing

Line drawing from left to right.
Fude leans 30 degree to the right.
Fude leads the fude hair.
The direction of fude points which the line goes.
Take half second breath when you put fude on the paper. Then move fude.
When you finish drawing the line, take half second breath before you get fude up of the paper.
The first line you draw is blacker than the second one.
The last sumi ink that you put into fude will put on the paper first.
In order to get gradation on drawing, you need the different level of black sumi ink into fude
Ink loading preparation is the most important technique in sumi-e.

In this rainbow stage, what you have to get is "one brush five gradation" technique. To draw a beautiful rainbow, making an appropriate brush is inevitable.

3) Side stroke (Soku-hitsu)

Use whole side of fude hair.
Lean down fude.
Hold fude 90 degree cross the line direction.

4) Thin Line Drawing (Sen-Byo)

Bend fude hair on the clothe.
Put sumi on the behind only.
Hold fude 90 degree cross the line direction.

5) Small Leaves Drawing

Put fude on suzuri and get sumi only one side of fude hair
Put fude-saki, then push fude and swipe down. (Three action at the same time)
Flex the wrist for fude swipe.
This technique apply to the cherry blossom drawing.

Video tutorial 2 includes ; 1) Preparation for Drawing, 2) Draw Bamboo Leaves, 3) Side Stroke(Soku-hitsu), 4) Size of fude

1. Make sumi ink

Put water in the hole part of suzuri. Have a sumi bar and dip it into the water. Grind sumi bar on the no water part of suzuri. Hold sumi bar with 45 degree toward the surface of suzuri. Grind sumi bar with very little power and grind it like drawing circle. Imagine that tiny particle coming out of the ink bar. The sense of sumi ink rises meanwhile. Done when the water turns out the black ink.

2. Put sumi into Fude

Put fude into the water.
Put fude onto the clothe in order to wipe water out.
Don't move fude, just put it on softly.
Shape the tip of the hair of fude(fude-saki) sharpened.
Put sumi ink into fude in the suzuri.
Squeeze sumi ink out of fude in the small white plate.
Draw fude on the edge of the small plate, to squeeze sumi out.

3. Calibrate the sumi ink black color

Put the water in fude.
Squeeze water out onto the sumi in the plate and mix it.
Squeeze out the whole mixed sumi-water, which turns out the light black.
Then, ladle that light black sumi into fude.
Dip the fude-saki into the sumi ink in suzuri.
Shape fude on the clothe.
You all set for drawing.

4. Draw Bamboo leaves : The example of straight stroke

Scratch back with the tip of the hair of fude (fude-saki)
Move down fude
Pushing fude onto the paper with moving down. (Two actions : moving and pushing)
The part of pushing fude will be the swell of the bamboo leaf
Then, Pulling fude off gradually along with the down-move of fude.(Two actions : moving and pulling )
Pull fude off with the fude-saki in order to get the bamboo leaf edge.
If you pull fude with the body of fude hair, the edge shape of bamboo leaf will be round.
In the end part of bamboo leaf drawing, fude leans down and the fude hair positioned at your side.
See the video the fude position change along with the fude hair.

5. Side Stroke

Prepare fude ( very very important )
Lean down fude with 0 degree at the paper.
Use the whole fude hair.
This technique apply to the tree trunk.

6. The Size of Fude

Fude hair is 3.5 cm length.
Made from the weasel.
I use only this size fude for all my works.
The change fude hair shape and control fude movement is essential for sumi-e technique.

Enjoy :)

FAQ1: Almost all rice paper ,wa-shi, gets wrinkly, when you draw. To give someone your suim-e, you need stick another paper backside, so that a paper get right. (this called, ura uchi, ura= back, uchi=stick)

FAQ2: Gradation problem. Try just lay a brush and put it on paper. Like to stamp the brush. If you get right gradation in a brush, you can get shade on paper exactly the brush has.

FAQ3:What Kind of Brush? Hair made of wease is good. The length of hais is about 4- 5cm. Sumie brush hair is harder and shorter than that of calligraphy. Price of it in Japan is 4,000 yen.

Video 1



Video 2



Sumi-e Images on flickr

Sumi-e Lesson TOP